View PS21661-FR_787799.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PS21661-RZ/-FR
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
IntellimodTM Module
Single-In-Line Intelligent Power Module 3 Amperes/600 Volts
A D M L K J H G
35 34 33 32 31 30
HEATSINK SIDE C W N P Y X
E AK V (2 PLACES) F AJ Z AA AL AD AB AH U T Q R S AE AG AF AC B
PS21661-RZ
1
2345
6 7 8 9 10 11
12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
HEATSINK SIDE TERMINAL CODE
1 2 3 4 5 6 N P FO NC VNC CIN 7 8 9 10 11 12 VN1 NC WN VWFB WP W(VWFS) 13 14 15 16 17 18 NC VPG NC VN1 NC VN VVFBV 19 20 21 22 23 24 VP V(VVFS) NC UPG NC VN1 NC 25 26 27 28 29 30 UN VUFB UP U(VUFS) NC NC 31 32 33 34 35 NC NC NC NC NC
Description: SIP-IPMs are intelligent power modules that integrate power devices, drivers, and protection circuitry in an ultra compact single-in-line transfer-mold package for use in driving small three phase motors. Use of 5th generation IGBTs, SIP packaging, and application specific HVICs allow the designer to reduce inverter size and overall design time. Features: Compact Packages Single Power Supply Integrated HVICs Direct Connection to CPU Applications: Washing Machines Refrigerators Air Conditioners Small Servo Motors Small Motor Control Ordering Information: PS21661-RZ is a 600V, 3 Ampere SIP Intelligent Power Module.
WPG
Outline Drawing and Circuit Diagram Dimensions A B C D E F G H J K L M N P Q R S T Inches 1.50 0.94 0.16 1.38 0.33 0.61 0.15 0.38 0.57 0.80 1.00 1.23 0.047 0.028 1.39 0.048 0.05 0.10 Millimeters 38.0 24.0 4.0 35.0 8.5 15.5 3.8 9.6 14.6 20.4 25.4 31.2 1.2 0.7 35.28 1.22 1.27 2.54 Dimensions U V W X Y Z AA AB AC AD AE AF AG AH AJ AK AL Inches 0.02 0.06 0.07 0.03 0.11 0.90 0.75 0.17 0.20 0.09 0.15 0.05 0.20 0.016 0.13 0.14 0.28 Millimeters 0.5 1.6 1.9 0.8 2.7 22.8 19.0 4.2 5.2 2.4 3.81 1.27 5.08 0.4 3.3 3.6 0.7
1
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PS21661-RZ/-FR IntellimodTM Module Single-In-Line Intelligent Power Module 3 Amperes/600 Volts
A D M L K J H G
35 34 33 32 31 30
HEATSINK SIDE C W N P Y X
E AG V (2 PLACES) F AH Z AA AJ 0 +10 -0 AB AD AC 0 +10 -0 R B
PS21661-FR
1
2345
6 7 8 9 10 11
12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
U T Q
S
AF
AE HEATSINK SIDE TERMINAL CODE
1 2 3 4 5 6 N P FO NC VNC CIN 7 8 9 10 11 12 VN1 NC WN VWFB WP W(VWFS) 13 14 15 16 17 18 NC VPG NC VN1 NC VN VVFBV 19 20 21 22 23 24 VP V(VVFS) NC UPG NC VN1 NC 25 26 27 28 29 30 UN VUFB UP U(VUFS) NC NC 31 32 33 34 35 NC NC NC NC NC
WPG
Outline Drawing and Circuit Diagram Dimensions A B C D E F G H J K L M N P Q R S Inches 1.50 0.94 0.16 1.38 0.33 0.61 0.15 0.38 0.57 0.80 1.00 1.23 0.047 0.028 1.39 0.048 0.05 Millimeters 38.0 24.0 4.0 35.0 8.5 15.5 3.8 9.6 14.6 20.4 25.4 31.2 1.2 0.7 35.28 1.22 1.27 Dimensions T U V W X Y Z AA AB AC AD AE AF AG AH AJ Inches 0.10 0.02 0.06 0.07 0.03 0.11 0.90 0.71 0.20 0.016 0.09 0.22 0.26 0.14 0.13 0.028 Millimeters 2.54 0.5 1.6 1.9 0.8 2.7 22.8 18.1 5.08 0.4 2.4 5.5 6.5 3.6 3.3 0.7
2
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PS21661-RZ/-FR IntellimodTM Module Single-In-Line Intelligent Power Module 3 Amperes/600 Volts
Absolute Maximum Ratings, Tj = 25C unless otherwise specified
Characteristics Power Device Junction Temperature* Heatsink Operation Temperature (See Tf Measurement Point Illustration) Storage Temperature Mounting Torque, M3 Mounting Screws Module Weight (Typical) Self-protection Supply Voltage Limit (Short Circuit Protection Capability)** Isolation Voltage, AC 1 minute, 60Hz Sinusoidal, Connection Pins to Heatsink Plate Symbol Tj Tf Tstg -- -- VCC(prot.) VISO PS21661-RZ/-FR -20 to 125 -20 to 100 -40 to 125 7 10 400 2500 Units C C C in-lb Grams Volts Volts
*The maximum junction temperature rating of the power chips integrated within the SIP-IPM is 150C (@Tf 100C). However, to ensure safe operation of the SIP-IPM, the average junction temperature should be limited to Tj(avg) 125C (@Tf 100C). **VD = 13.5 ~ 16.5V, Inverter Part, Tj = 125C, Non-repetitive, Less than 2s
IGBT Inverter Sector
Collector-Emitter Voltage Collector Current (Tf = 25C) Peak Collector Current (Tf = 25C, tw 1ms) Supply Voltage (Applied between P - N) Supply Voltage, Surge (Applied between P - N) Collector Dissipation (Tf = 25C, per 1 Chip) VCES IC ICP VCC VCC(surge) PC 600 3 6 450 500 11.1 Volts Amperes Amperes Volts Volts Watts
Control Sector
Supply Voltage (Applied between VN1-VNC) Supply Voltage (Applied between VUFB-U(VUFS), VVFB-V(VVFS), VWFB-W(VWFS)) Input Voltage (Applied between UP, VP, WP-VNC, UN, VN, WN-VNC) Fault Output Supply Voltage (Applied between FO-VNC) Fault Output Current (Sink Current at FO Terminal) Current Sensing Input Voltage (Applied between CIN-VNC) VD VDB VIN VFO IFO VSC 20 20 -0.5 ~ VD -0.5 ~ VD 10 -0.5 ~ VD Volts Volts Volts Volts mA Volts
Tf Measurement Point
CONTROL TERMINALS SIP-IPM
10.5mm
15mm
Al BOARD 1.5mm 10mm
FWDi CHIP
IGBT CHIP
25mm
TEMPERATURE MEASUREMENT POINT (INSIDE THE Al BOARD)
TEMPERATURE MEASUREMENT POINT (INSIDE THE Al BOARD)
3
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PS21661-RZ/-FR IntellimodTM Module Single-In-Line Intelligent Power Module 3 Amperes/600 Volts
Electrical and Mechanical Characteristics, Tj = 25C unless otherwise specified
Characteristics Symbol Test Conditions Min. Typ. Max. Units
IGBT Inverter Sector
Collector Cutoff Current ICES VEC VCE(sat) ton trr tC(on) toff tC(off) VCC = 300V, VD = VDB = 15V, IC = 3A, Tj = 125C, VIN = 0 5V, Inductive Load (Upper-Lower Arm) VCE = VCES, Tj = 25C VCE = VCES, Tj = 125C Diode Forward Voltage Collector-Emitter Saturation Voltage Tj = 25C, -IC = 3A, VIN = 0V IC = 3A, Tj = 25C, VD = VDB = 15V, VIN = 5V IC = 3A, Tj = 125C, VD = VDB = 15V, VIN = 5V Inductive Load Switching Times -- -- -- -- -- 0.50 -- -- -- -- -- -- 1.55 1.60 1.70 0.85 0.20 0.35 1.00 0.55 1.0 10 2.00 2.15 2.30 1.25 -- 0.55 1.50 1.10 mA mA Volts Volts Volts S S S S S
Thermal Characteristics
Characteristic Junction to Fin Thermal Resistance Symbol Rth(j-f)Q Rth(j-f)D Condition IGBT Part (Per 1/6 Module) FWDi Part (Per 1/6 Module) Min. -- -- Typ. -- -- Max. 9.0 9.0 Units C/Watt C/Watt
Recommended Conditions for Use
Characteristic Supply Voltage Control Supply Voltage Symbol VCC VD VDB Control Supply Variation PWM Input Frequency Allowable RMS Current* VD, VDB fPWM IO VNC PWIN tDEAD Tf 100C, Tj 125C VCC = 300V, VD = 15V, fc = 15kHz, PF = 0.8 Sinusoidal, Tj 125C, Tf 100C VNC Terminal Voltage Minimum Input Pulse Width** Arm Shoot-through Blocking Time Applied between VNC-N (Include Surge Voltage) ON/OFF For Each Input Signal -5 0.3 1.5 -- -- -- 5 -- -- Volts S S Condition Applied between P-N Terminals Applied between VN1-VNC Applied between VUFB-U(VUFS), VVFB-V(VVFS), VWFB-W(VWFS) -1 -- -- -- 15 -- 1 -- 17 V/s kHz Arms Min. 0 13.5 13.0 Typ. 300 15.0 15.0 Value 400 16.5 18.5 Units Volts Volts Volts
* The allowable RMS current value depends on the actual application conditions. **There might be no output when the input signal width is less than PWIN.
4
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PS21661-RZ/-FR IntellimodTM Module Single-In-Line Intelligent Power Module 3 Amperes/600 Volts
Electrical and Mechanical Characteristics, Tj = 25C unless otherwise specified
Characteristics Symbol Test Conditions Min. Typ. Max. Units
Control Sector
Supply Voltage VD VDB Circuit Current ID Applied between VN1-VNC Applied between VUFB-VUFS, VVFB-VVFS, VWFB-VWFS VD = 15V, VIN = 0V, Total of VN1-VNC (U, V, W) VD = 15V, VIN = 5V, Total of VN1-VNC (U, V, W) IDB VDB = 15V, VIN = 0V, VUFB-U(VUFS), VVFB-V(VVFS), VWFB-W(VWFS) VDB = 15V, VIN = 5V, VUFB-U(VUFS), VVFB-V(VVFS), VWFB-W(VWFS) Fault Output Voltage VFOH VFOL Input Current PWM Input Frequency Short Circuit Trip Level* Supply Circuit Under-voltage IIN fPWM VSC(ref) UVDBt UVDBr UVDt UVDr Fault Output Pulse Width** ON Threshold Voltage OFF Threshold Voltage tFO Vth(on) Vth(off) Applied between UP, VP, WP-VNC, UN, VN, WN-VNC VSC = 0V, FO Circuit: 1k to 5V Pull-up VSC = 1V, IFO = -10mA VIN = 5V Tf 100C, Tj 125C Tj = 25C, VD = 15V Trip Level, Tj 125C Reset Level, Tj 125C Trip Level, Tj 125C Reset Level, Tj 125C 4.9 -- 0.70 -- 0.43 10.0 10.5 10.3 10.8 20 2.10 1.10 -- -- 1.06 15 0.48 -- -- -- -- 40 2.35 1.40 -- 0.95 1.50 -- 0.53 12.0 12.5 12.5 13.0 -- 2.60 1.80 Volts Volts mA kHz Volts Volts Volts Volts Volts S Volts Volts -- -- 0.50 mA -- -- 0.50 mA -- -- 3.60 mA -- -- 3.60 mA 13.5 13.5 15.0 15.0 16.5 16.5 Volts Volts
* Short Circuit protection is functioning only at the lower-arms. Please select the value of the external shunt resistor such that the SC trip level is less than 5.1A. **FO signal is only asserted when the SC or UV protection is activated on the low side.
5
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PS21661-RZ/-FR IntellimodTM Module Single-In-Line Intelligent Power Module 3 Amperes/600 Volts
6

▲Up To Search▲

Price & Availability of PS21661-FR

	To Download PS21661-FR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .